What you are going to do is place this sponge over the small hole you drilled in the pipe cap, and secure it there by covering it with a piece of lightweight screen or mesh cloth. Once you have them cleaned, just apply a coating of glue to both the pipe and the fitting, slide the fitting on and twist it at the same time. You might have to experiment a little with the size of the hole you need, but make sure you start with a very small hole. You'll need a plastic PVC cap for one end of the pipe, and on the other end you'll need an adapter to convert the PVC pipe to a standard pipe thread. What you need to do is to get the PVC pipe reduced down to a male garden hose type fitting. Screw the garden hose cap to the male garden hose fitting. You only need a piece 30" long, but they might make you buy a 10' section. As always, read the label and follow the directions on the herbicide package.

Cut a piece of regular household sponge in a square about 1-1/2" square. Website URLs must be active links. Drill a very small hole right in the middle of the pipe cap.. If you spray to the point of run off, you are applying way too much. Hardware stores sell brass fittings that convert standard pipe thread to the same thread used on garden hoses. Remember, you only want the weeds damp and not dripping wet. The RoundUp will seep out the hole in the end of the pipe cap 50A Latching Smart Home Relay and be absorbed by the sponge. The biggest mistakes that people make when using non-selective herbicides like RoundUp is overspray getting the herbicide on plants that they did not intend to spray, and over applying the product. If the sponge gets too dry you can loosen the cap a little to release the vacuum and more herbicide will be released onto the sponge. Once the sponge is damp, you can start dabbing weeds.Probably what you'll end up with is an adapter that will convert the 1-1/2" PVC to 3/4" male pipe.

Cut a piece of pipe 30" long and glue the pipe cap on one end, and the PVC to pipe thread adapter on the other end.Now back to the end of the pipe that you glued the pipe cap to. Hold the fitting tight for 60 seconds and it will be glued tightly. They also make a cap that you can install on the end of a garden hose, you'll need one of those. You can secure the mesh to the PVC pipe with a hose clamp, or electrical tape. Maybe even a piece of an onion bag. Or you can simply turn the tool upside down and that should let some air into the chamber, thus releasing the vacuum. You are welcome to use this article with an affiliate link. As long as you are leaving some RoundUp on the weeds as you dab them, the herbicide should kill them. I'd start with 1/16".Start by going to your hardware store and buying a piece of 1- 1/2" PVC pipe. You have to use the cleaner to remove the film and gloss from the PVC pipe and fittings before you glue them. Remove the garden hose cap from the other end of the PVC pipe, and fill the pipe with pre-mixed (ready to use) RoundUp.The PVC fittings have to be glued on so you'll have to pick up some PVC pipe glue and cleaner. Replace the garden hose cap and you have yourself a weed dabber.

freeplants. It's pretty cheap though.You are welcome to use this article on your website or in your newsletter as long as you reprint it as is, including the contact information at the end.The weed dabber is a tool used for spot treating weeds without getting the herbicide on other plants. As long as the garden hose cap is tight, the vacuum in the pipe will keep the herbicide from running out too fast.htmThe tool that I am going to tell you about is for using herbicides such as RoundUp.Depending on the temperatures, it could take a week or so before you can see the effects of the herbicide. Then an adapter to convert the 3/4" male pipe to a male garden house fitting. Apply a small amount of pipe dope or Teflon tape to the threads of the adapter, and screw the male garden house fitting onto the adapter.com/resellers. You'll have to let the clerk at the hardware store help you find the best combination of fittings to use. This cap must have a rubber garden hose washer in it so it seals properly

Megosztás a facebookon